1. Pass 802.11n draft 2.0 Wi-Fi certification 2. Fixed: Can not associate to an access point with special characters in its SSID. 3. Fixed: Client unable to connect with WNR854T when operating in mix mode wireless security (WPA+WPA2 mix mode)
Known Issues
1. WPA2 security performance is better then WPA. We recommend to use WPA2 security if you enable wireless security.
File Description: This software is compatible with Windows 98SE, Windows ME, Windows 2000 and Windows XP.
WPA is supported with Windows XP supplicant and Funk Odyssey. This release does not support WPA with NETGEAR's user interface.
The WG121 is backward compatible with USB 1.1, however speed is limited to the USB's 14 Mbps. Furthermore, there is some overhead between the USB port and CPU or memory interface, so somewhat less than 14 Mpbs is attained.
File Description: Netgear Wireless USB Ethernet Adaptor driver for Windows Vista 32 bit.
Model: WG111v2
This is the beta release for Vista 32 and 64 bit OS.
Driver Version: 6.1258.1201.2006
Bug fix 1. Fixed the device will be in disable state automatically if this adapter is plugged out from the standby mode PC.
Known bugs 1. Can't control device nor find any AP after plug-out and re-insert adapter several times. workaround: Plug out and re-insert it again. 2. The adapter won't connect to AP2 in the profile2 automatically if the connected AP1 is powered off or out of range. [only in Vista 32] 3. Click "disconnect" on the connected AP1, then choose "connect to a network" and connect to AP2. Sometimes it will show "can't find this AP". 4. Poor throughput. 5. Signal strength in the sitesurvey list is not totally correct.
File Description: Netgear Wireless USB Ethernet Adaptor driver for Windows Vista.
Model: WG111v2
This is the beta release for Vista 32 and 64 bit OS.
Driver Version: 6.1258.1201.2006
Bug fix 1. Fixed the device will be in disable state automatically if this adapter is plugged out from the standby mode PC.
Known bugs 1. Can't control device nor find any AP after plug-out and re-insert adapter several times. workaround: Plug out and re-insert it again. 2. The adapter won't connect to AP2 in the profile2 automatically if the connected AP1 is powered off or out of range. [only in Vista 32] 3. Click "disconnect" on the connected AP1, then choose "connect to a network" and connect to AP2. Sometimes it will show "can't find this AP". 4. Poor throughput. 5. Signal strength in the sitesurvey list is not totally correct.
File Description: Redhat 7.1 uses kernel 2.4 which includes National Semiconductor chipset support. FA311 and FA312 both use the National Semiconductor chip set. We have tested the included driver and found that to work well. The files can be located at these locations:Module: /lib/modules/2.4.2-2/kernel/drivers/net/natsemi.oSource: /usr/src/linux-2.4/drivers/net/natsemi.c The attachment to this article includes a makefile which can be used as a reference for the compilation.*** Please note that NETGEAR does not Support Linux, except as part of premium support.
Drivers
AMD CPU Drivers & Tools
